Attic Mold Inspections & Mold Remediation in Edmonds
Get Your Free Inspection
Edmonds at a Glance
- Distance from HQ: 15 miles from our Seattle headquarters
- Average Response Time: 34 minutes to Edmonds
- Landmark Proximity: 25 minutes from Edmonds Underwater Park
Climate Considerations
- Elevation: 20 ft above sea level
- Average Humidity: 73.4%
- Annual Rainfall: 41.55 inches
- Experiences significant rainfall in fall and winter months
- Low elevation and heavy rainfall can cause flooding scenarios
Local Housing Profile
- Average Building Age: 65 years
- Single-family residences
- Multi-family units and townhomes near the waterfront
Common Edmonds Mold Scenarios
- Heavy rains can lead to localized flooding or water intrusion
- High humidity in cooler temperatures can cause condensation on windows
- Heavy rain can result in roof leaks
- Poor bathroom ventilation plus the region’s damp climate can lead to mold
Edmonds at a Glance
- Distance from HQ: 15 miles from our Seattle headquarters
- Average Response Time: 34 minutes to Edmonds
- Landmark Proximity: 25 minutes from Edmonds Underwater Park
Climate Considerations
- Elevation: 20 ft above sea level
- Average Humidity: 73.4%
- Annual Rainfall: 41.55 inches
- Experiences significant rainfall in fall and winter months
- Low elevation and heavy rainfall can cause flooding scenarios
Local Housing Profile
- Average Building Age: 65 years
- Single-family residences
- Multi-family units and townhomes near the waterfront
Common Edmonds Mold Scenarios
- Heavy rains can lead to localized flooding or water intrusion
- High humidity in cooler temperatures can cause condensation on windows
- Heavy rain can result in roof leaks
- Poor bathroom ventilation plus the region’s damp climate can lead to mold
City Requirements
- Edmonds is divided into various zoning districts, including Residential (R) for single-family homes, Mixed-Use (MU) zones for diverse developments, and Commercial (C) districts for business activities.
- All construction, remodeling, or significant landscaping activities require a building permit from the City of Edmonds’ Development Services Department.
- Compliance with the Edmonds Municipal Code, particularly the Rental Housing Code, is mandatory to ensure all rental properties meet the city’s standards for livability and safety.
Property Management Considerations
- Tenant rights in Edmonds are protected under the Washington Residential Landlord-Tenant Act, which defines the responsibilities and rights for both landlords and tenants.
- Landlords may be required to register rental properties with Snohomish County and comply with any applicable county regulations.
- The City of Edmonds conducts periodic inspections of rental properties to ensure adherence to health and safety codes, including those related to housing quality.
Safety Standards
- All contractors must comply with Washington State’s workplace safety regulations and OSHA standards while conducting construction and renovation work.
- Property managers and landlords should remain informed about Edmonds and Snohomish County Health Department regulations concerning environmental safety, pest control, and mold prevention to maintain safe living conditions for tenants.
Additional Edmonds Considerations
- Edmonds emphasizes the importance of preserving its historical sites and character, especially in the downtown and waterfront areas, which may be subject to specific development guidelines.
- The city has an active commitment to sustainability, promoting eco-friendly building practices and environmentally sensitive development to protect natural resources, including shoreline and marine environments.
- Developments near Edmonds’ public parks, beaches, and the Puget Sound should consider the ecological impact and adhere to regulations regarding shoreline management and habitat preservation.
- Community engagement is encouraged in the development process, with public hearings and input opportunities provided for residents on projects that may affect their neighborhoods.
- The presence of the Edmonds ferry terminal leads to unique traffic and development considerations, especially for projects aimed at enhancing accessibility and connectivity to nearby areas.
Recent Crawl Space Work in Edmonds
Crawl Space Clean-Out, Insulation & Vapor Barrier Installation
Attic Doctor completed a comprehensive crawl space restoration project for a residential homeowner in Edmonds who was concerned about water leaks, deteriorating insulation, and the possibility of mold growth. The team cleaned out the entire crawl space, thoroughly air sealed the area, installed new insulation, and added a white vapor barrier to help protect the space from ground moisture.
Edmonds
Residential crawl space project
7-Person Crew
Worked from 9 AM to 6:45 PM
48-Inch Joist Spacing
Required additional insulation supports
PSE Rebate Project
Installed to applicable program requirements
Scope
- Clean out the entire crawl space
- Inspect the space for moisture-related concerns
- Thoroughly air seal gaps and penetrations
- Install 1-by-2-inch wood support strips along the subfloor
- Install 3-to-4-inch crawl space insulation
- Secure the insulation beneath the widely spaced joists
- Install a new white vapor barrier across the crawl space floor
- Complete the work to meet PSE rebate requirements
Outcome
- The old and damaged crawl space materials were removed
- New insulation was installed upright and securely supported
- Wood strips helped prevent insulation from sagging or falling
- Air sealing reduced gaps where outside air could enter the home
- The new vapor barrier created a cleaner, brighter crawl space floor
- The completed crawl space looked completely transformed
- The client said the finished space looked “brand new”
- The project was completed with close attention to detail and quality
Key Takeaway
Homes with unusually wide floor-joist spacing require additional planning to keep crawl space insulation securely in place. Because this Edmonds home had joists spaced approximately 48 inches apart, Attic Doctor installed 1-by-2-inch wood strips along the subfloor before installing the insulation. This added support helped satisfy the project requirements, protected the insulation from sagging, and contributed to a clean, durable finished result.
Edmonds-Specific Regulations & Requirements
City Requirements
- Edmonds is divided into various zoning districts, including Residential (R) for single-family homes, Mixed-Use (MU) zones for diverse developments, and Commercial (C) districts for business activities.
- All construction, remodeling, or significant landscaping activities require a building permit from the City of Edmonds’ Development Services Department.
- Compliance with the Edmonds Municipal Code, particularly the Rental Housing Code, is mandatory to ensure all rental properties meet the city’s standards for livability and safety.
Property Management Considerations
- Tenant rights in Edmonds are protected under the Washington Residential Landlord-Tenant Act, which defines the responsibilities and rights for both landlords and tenants.
- Landlords may be required to register rental properties with Snohomish County and comply with any applicable county regulations.
- The City of Edmonds conducts periodic inspections of rental properties to ensure adherence to health and safety codes, including those related to housing quality.
Safety Standards
- All contractors must comply with Washington State’s workplace safety regulations and OSHA standards while conducting construction and renovation work.
- Property managers and landlords should remain informed about Edmonds and Snohomish County Health Department regulations concerning environmental safety, pest control, and mold prevention to maintain safe living conditions for tenants.
Additional Edmonds Considerations
- Edmonds emphasizes the importance of preserving its historical sites and character, especially in the downtown and waterfront areas, which may be subject to specific development guidelines.
- The city has an active commitment to sustainability, promoting eco-friendly building practices and environmentally sensitive development to protect natural resources, including shoreline and marine environments.
- Developments near Edmonds’ public parks, beaches, and the Puget Sound should consider the ecological impact and adhere to regulations regarding shoreline management and habitat preservation.
- Community engagement is encouraged in the development process, with public hearings and input opportunities provided for residents on projects that may affect their neighborhoods.
- The presence of the Edmonds ferry terminal leads to unique traffic and development considerations, especially for projects aimed at enhancing accessibility and connectivity to nearby areas.
Locations Served
Seattle
- Downtown Seattle
- West Seattle
- South Lake
- Union
- Magnolia
- Queen Anne
- Ballard
- Pioneer Square
- Belltown
North Seattle
- Shoreline
- Lake Forest Park
- Edmonds
- Mountlake Terrace
- Lynnwood
- Mill Creek Kenmore
- Mukilteo
- Everett
- Lake Stevens
Tacoma
- Downtown Tacoma
- North Tacoma
- Fircrest
- University Place
- Lakewood
- Puyallup
- Federal Way
- Auburn
- Sumner
- Bonney Lake
Olympia
- Downtown Olympia
- Lacey
- Tumwater
- Yelm
- DuPont
- Tenino
- Rochester
- Grand Mound
- Rainier
- Boston Harbor